Adjust-A-Gate Gate Kit 2 Rail 36" high gate, 60"-96" wide

The Adjust-A-Gate system is always the right solution for wooden fence gates. Installation is easy and the results look professionally done.
• Hinges tested up to 3000 lbs. per hinge before bending
• Fits 3 foot high gates and widths from 5-8 feet
• Unique steel sleeve construction allows frame to adjust to any opening for a perfect fit and with its tough, corrosion resistant powder coating that is colored to coordinate with the wood.
• Adjustable Truss Cable - Installs diagonally across gate frame to prevent sagging.

$144.84

SKU: JC-AG60-36

Shipping

Delivery date Usually ships within 5 days

Qty:

+ -

Overview

Steel Gate Kit Features:

1-1/2" galvanized steel square frame, .045" wall thickness
Powder coat finish ensures longer-lasting finish
Adjustable anti-sag diagonal truss cable
All hardware & screws included (gate hinges & latch)
Hinges tested up to 3000 lbs. per hinge before bending
Wood not included
These gate kits use a unique sleeve-system that allows the gate to be adjusted to fit the gate opening.
The gate kits can be used as a single OR double swing gates

Suggested tools required:

1 - 9/16" wrench or adjustable end wrench
1 - 5/16" wrench or adjustable end wrench
1 - Phillips screwdriver
1 - pair wire cutters
1 - drill
1 - 1/2" spade drill bit

Steel Gate Kit Features:

1-1/2" galvanized steel square frame, .045" wall thickness
Powder coat finish ensures longer-lasting finish
Adjustable anti-sag diagonal truss cable
All hardware & screws included (gate hinges & latch)
Hinges tested up to 3000 lbs. per hinge before bending
Wood not included
These gate kits use a unique sleeve-system that allows the gate to be adjusted to fit the gate opening.
The gate kits can be used as a single OR double swing gates

Suggested tools required:

1 - 9/16" wrench or adjustable end wrench
1 - 5/16" wrench or adjustable end wrench
1 - Phillips screwdriver
1 - pair wire cutters
1 - drill
1 - 1/2" spade drill bit